I've been internet ordering for years
and this has been my best experience!
The order was acknowledged quickly by email and updated
with tracking information. Not only was my order delivered in record
time, you emailed saving me from ordering incorrectly and later helped me with the installation,
too. Thank you so much for the great service.
Check your email for an order response.
Orders are verified. Tracking information
will be sent at the time of shipment. So please check your
email after ordering for the first email and daily for further emails
with information about your order. Thank you!
6.25 or 7 inch Axle for Razor rear 8 inch (200x50) wheel Axle Length: 159mm (6.25 inch) or 6.7 Inch (170mm), Axle Diameter: 10mm (3/8 inch). For most Razor 8 (200 x 50) Inch Rear Wheels. $9.95
plus shipping/handling
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
Length Choice
Axle, with hardware for E100/E200 8 inch Front Wheel or Axle, with hardware for E300 10 inch Front Wheel Includes axle, most spacers, and nuts Spacers may vary in size for different installations. 3/8 axle for 8 inch wheel and 10 inch wheel. $14.95
plus shipping/handling
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
Front Wheel Choice
Axle, with hardware for E200 8 inch Rear Wheel or Axle, with hardware for E300 10 inch Rear Wheel Includes axle, spacers, nuts, and tensioners Spacers and axle diameter may vary in size. 3/8 axle for 8 inch wheel, 15/32 inch through bearings for 10 inch wheel. $17.95
plus shipping/handling
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
THE RAZOR E-100 USES THE HTD447-3M12. THE BELT NUMBER IS PRINTED ON THE BELT, OR YOU CAN MEASURE AND COUNT THE TEETH NOTING INFORMATION ON OUR BELT CHART.
PAY YOUR UNPAID INTERNATIONAL SHIPPING. Item # razor-controller-e100
E100/E125 (V10+), 150/175/E Spark Control Module
Control Box without Go Button circuit (No Longer Available): may work on the Razor E100 and E125 (version 1 WITHOUT the green "Go" button only) with modifications. May replace the control module for the following models (with Wire/Plug modifications): Razor E100 & E125 (version 1 only). If ANY of the following apply to your E100, this controller without the Go Button is NOT compatible with your scooter: Your E100/E125 is chain driven and has a twist grip throttle OR Your E100/E125 is manufactured by JD. JD scooter barcodes start with "JD" or "30". OR Your Razor E100/E125 scooter has an external green "Go" button.
Razor E100/E125/E150 Control Module with 7 connectors (Available). Fits the following CHAIN driven models:
E100: V10+, E125: V10+, E150: V1+.
**Note: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"=version 1, "02"=version 2, etc.)
Tested prior to packaging. No returns or exchanges due to the sensitive nature of this device (Buy at your own risk). Installation is suggested by a competent person using care to avoid misconnection and static electricity that will cause a defect.
Tested prior to packaging. No returns or exchanges due to the sensitive nature of this device (Buy at your own risk). Installation is suggested by a competent person using care to avoid misconnection and static electricity that will cause a defect.
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
Controller Choice
Item # razor-controller-controller24voltkit-2
Razor 7 Plug 24 Volt Electrical Kit for the following models: E200: V13+, E300: V11 and V13+. Note: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"=version 1, "02"=version 2, etc.)
24 Volt, 30 Ah, 7 Plugs, includes the Twist Throttle with Wire Length: 50 inches
Tested prior to packaging. No returns or exchanges due to the sensitive nature of this device (Buy at your own risk). Installation is suggested by a competent person using care to avoid misconnection and static electricity that will cause a defect.
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
Item # razor-controller-e200-300controller
Razor 7 Plug 24 Volt Controller for the following models: E200, V24+ and E300, V20+. Note: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"=version 1, "02"=version 2, etc.)
24 Volt, 30 Ah, 7 Plug Control Box
Tested prior to packaging. No returns or exchanges due to the sensitive nature of this device (Buy at your own risk). Installation is suggested by a competent person using care to avoid misconnection and static electricity that will cause a defect.
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
Item # razor-controller-mx500
Razor 36 Volt Controller module and Throttle Kit Razor Electrical Kit for all versions of the MX500 & MX650. Includes throttle and control module and must be used together.
Tested prior to packaging. No returns or exchanges due to the sensitive nature of this device (Buy at your own risk). Installation is suggested by a competent person using care to avoid misconnection and static electricity that will cause a defect.
PAY YOUR UNPAID INTERNATIONAL SHIPPING. Item # razor-e200rwheel
Wheel, Rear, Current E200 use, 200 X 50 Tire on metal rim with 5M Belt Hub (Pictured with all parts attached but not included)
PAY YOUR UNPAID INTERNATIONAL SHIPPING. Item # razor-e300fwheel
Wheel, Front, E300, 3.00-4
Includes bearings, silver rim, and quality pneumatic tire and tube.
$36.95 Each Plus Shipping/Handling
PAY YOUR UNPAID INTERNATIONAL SHIPPING. Item # razor-mx500fwheel
Wheel, Front, MX500/MX650, 16 x 2.4
Includes 6001rs bearings, silver rim with disk brake, and quality pneumatic knobby tire and tube.
EMAIL SALES@SCOOTERSUPPORT.COM FOR AVAILABILITY AND PURCHASE
Item # razor-mx500rwheel
Wheel, Rear, MX500/MX650, 10 x 2.5
Includes 6001rs bearings, silver rim with disk brake, and quality pneumatic knobby tire and tube.
PAY YOUR UNPAID INTERNATIONAL SHIPPING. Item # razor-mx500/650tire
Tire, 16 x 2.4, Razor MX500/650 Front, Now substituting the 16 x 2.5 Street Tread Tire
RAZOR SCOOTER MODEL PARTS ARE SOLD AS OEM (ORIGINAL EQUIPMENT MANUFACTURED) PARTS. PRICES, DESCRIPTIONS, PICTURES, AND AVAILABILITY ARE ALL SUBJECT TO CHANGE. OUR AVAILABILITY PAGE LINK DOES NOT PROVIDE THE CURRENT AVAILABILITY OR OUTAGE OF OEM RAZOR PARTS SINCE THIS INFORMATION IS NOT MADE AVAILABLE TO US. PARTS WILL SHIP PROMPTLY AS AVAILABLE ONLY AND OTHERWISE BE ASSUMED TO BE TEMPORARILY UNAVAILABLE IF NOT RECEIVED WITHIN 30 DAYS. UNAVAILABLE PARTS ARE GENERALLY NOT AVAILABLE ANYWHERE FROM ANY VENDOR NATIONWIDE. AS UNAVAILABLE PARTS ARE ORDERED BY CUSTOMERS THEY WILL BE MAINTAINED IN A BACK ORDER STATUS AND SHIPPED AUTOMATICALLY WHEN AVAILABLE AGAIN. ORDERS MAY BE CANCELLED FOR A FULL REFUND WITHIN 45 DAYS. EMAIL WITH QUESTIONS
Thanks for shopping with us, we
appreciate your business.
SUMMARY:
When electric scooters first became popular our
Throttles, Controllers, Control Boxes, Battery Chargers, Batteries,
Brake Levers, Switches, Key Switches, On Off and Kill Switches,
Fuses and Fuseholders, Lighting and Signals, and Common Scooter
Electrical Components were available for customers in need who
otherwise could not get parts for their model scooters. Electrical
Scooter throttles, battery chargers, control boxes were very hard
to find, and still are for quality parts. The difference in our
electrical parts from others' electrical scooter parts is that we
reject the cheap parts sometimes available to us. Plus, we test the
electrical parts we sell prior to shipping them to our customers,
adding a little bit to the price but insuring quality. Bottom line
- fast receipt of quality electrical scooter parts!
NOTICE: PICTURES OF REPLACEMENT PARTS MAY VARY PRIOR TO UPDATES. PARTS ARE PROVIDED IN AS-IS CONDITION WITH NO REGARD TO SLIGHT COSMETIC IMPERFECTIONS DUE TO STORAGE OR HANDLING, AND PRODUCTION RUNS MAY SLIGHTLY ALTER THE APPEARANCE OF THE SAME PART FROM TIME TO TIME MAKING SLIGHT DIFFERENCES FOR MATCHING OF SEVERAL ITEMS IN AN ORDER (WHENEVER POSSIBLE WE MATCH AS CLOSELY AS POSSIBLE FOR ORDERS WHERE CUSTOMERS REQUEST THIS). ALL PARTS ARE INSPECTED AND TESTED AS POSSIBLE FOR QUALITY CONTROL PRIOR TO PACKAGING AND SHIPMENT OF CUSTOMER ORDERS. ALL SALES ARE FINAL WITH THE EXCEPTION OF NON-ELECTRICAL ITEM EXCHANGES FOLLOWING OUR TERMS OF SALE ORDER POLICIES FOR THE ORDERING OF INCORRECT PARTS. CUSTOMERS SHOULD ALWAYS TAKE ADVANTAGE OF OUR 24/7 EMAIL AND OTHER COMMUNCIATIONS FOR HELP PRIOR TO PLACING ORDERS, IF NEEDED. USA STANDARD SHIPPING IS INCLUDED IN THE PRICE OF PARTS ONCE ADDED TO THE SHOPPING CART THAT ALSO REPRESENTS THE HANDLING FEE FOR INTERNATIONAL ORDERS. INTERNATIONAL SHIPPING IS SEPARATE FOR EACH ORDER BASED ON INFORMATION PROVIDED ON OUR 'HOW TO PLACE AN ORDER' PAGE USING THE LINK IN THE ITEM DESCRIPTION. USA HANDLING IS ADDED TO EACH ORDER DURING CHECK-OUT TO ADJUST SHIPPING AND PROCESSING OF EACH USA ORDER. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND CUSTOMER WILL BE ADVISED IN THAT EVENT.
